пускане на оптичния трансивер на Allied Telesis AT-8024

[OLD]

има ли дефоулт ип чудото да не ръчкам емулатори и конзоли...и в 1 ип диапазон ли да са щайгата и чушкопека че да го настроя говедото

[OLD]

This parameter specifies the IP address of the chassis. You must
assign a chassis an IP address so it can be managed remotely using
Telnet or an SNMP application. In addition, if the management
workstation is separated from the chassis by a router, you must also
provide a gateway address, which is the IP address of a router through
which the chassis can communicate with the remote management
workstation. The IP address must be entered in the format:
xxx.xxx.xxx.xxx. The default value is 10.0.0.1.
Subnet mask
This parameter specifies the subnet mask for the chassis. You must
specify a subnet mask to manage the chassis remotely. The mask
address must be entered in the format: xxx.xxx.xxx.xxx. The default
value is 255.255.252.0.
Gateway address
This parameter specifies the default router’s IP address. This address
is required if you intend to remotely manage the chassis from a
management workstation that is separated from the chassis by a
router. The gateway address must be entered in the format:
xxx.xxx.xxx.xxx. The default value is 0.0.0.0.